DSPPA 10W Wall Mount Speaker | DSP106II

DSPPA 10W Wall Mount Speaker | DSP106II

The DSPPA DSP106II is a 10 W wall-mount speaker with a built-in 70 V / 100 V transformer and two speaker units, a 6.5-inch and a 2-inch. It covers 160 Hz – 18 kHz, with a sensitivity of 92 ±2 dB and a maximum sound pressure level of 100 ±2 dB.

Built for 70 V / 100 V PA lines: The 70 V / 100 V transmission works in a high-voltage, low-current mode. This allows longer cable runs and many speakers connected in parallel on the same line.

Three power taps: The COM-3W, COM-6W and COM-10W terminals give 3 W, 6 W or 10 W on a 100 V line, and 1.5 W, 3 W or 5 W on a 70 V line. You pick the terminal that gives the right loudness for each room.

Simple wall mounting: Hanging holes on the back let you hang the speaker on a 4 mm nail fixed in the wall, then adjust its angle and check that it is firm.

Durable build: The housing is injection-moulded from high-quality engineering plastic, durable and without deforming or fading, and the speaker has a damping treatment for a long service life and clear, bright sound.

Who it's for / Works with

DSPPA lists hotels, schools, offices and factories where background music and paging are needed. It connects to a PA amplifier with a 70 V or 100 V output.

Technical Specifications

📄 Datasheet: Download the official DSPPA DSP106II datasheet (PDF)

Speakers available in Jordan at the best price.

© متجر نصر – NaserTech Jordan