
EZVIZ T10C Water Leak Sensor
The EZVIZ T10C (CS-T10C) is a small, battery-powered water leak sensor that connects over ZigBee 3.0 to an EZVIZ Home Gateway. When water reaches the sensor, it sends an alert to your phone through the EZVIZ App, so a leaking pipe, sink or appliance can be found early. It runs on a replaceable CR2032 cell battery and has an IP67 waterproof enclosure.



Leak detection from 0.5 mm: The sensor triggers when the water level under it rises above 0.5 mm. Placed on the floor next to a water source, it reacts to a small puddle, before the water spreads across the room.
Alerts through the gateway: The T10C sends its alarm through the EZVIZ Home Gateway, which passes it to the EZVIZ App on your phone. This means you are warned about a leak even when you are not at home.
IP67 waterproof body: The sensor is rated IP67, so it keeps working when it sits in water or in damp places such as bathrooms, kitchens and areas under sinks.
Battery powered, no wiring: The T10C runs on a CR2032 cell battery that lasts up to one year based on two leak detections per day. It needs no power cable and is simply placed on a flat surface where a leak could happen.
Good to know
The T10C does not work on its own: it requires an EZVIZ Home Gateway, which is not included and is sold separately. The sensor has no tamper alarm.
Technical Specifications
| Model | CS-T10C |
| Detection Type | Water leaks |
| Trigger Water Level | Above 0.5 mm |
| Protocol | ZigBee 3.0 |
| Wireless Frequency | 2.4 GHz |
| Battery | CR2032 cell battery |
| Battery Life | Up to 1 year (based on 2 leak detections per day) |
| Waterproof Rating | IP67 |
| Operating Temperature | -10 °C to 55 °C |
| Storage Temperature | -20 °C to 60 °C |
| Dimensions | Φ 49 mm × 11.5 mm |
| Weight | 17.44 g |
| Installation | Placed on a flat surface |
| Requires | EZVIZ Home Gateway (sold separately) |
📄 Datasheet: Download the official EZVIZ T10C datasheet (PDF)
© متجر نصر – NaserTech Jordan