
Hikvision 16-Channel 4K AcuSeek NVR, 4 HDD Bays | DS-7716NXI-K4/VPro
The Hikvision DS-7716NXI-K4/VPro is a 16-channel 1.5U network video recorder from the AcuSeek K VPro series. It records IP cameras at up to 12 MP with 160 Mbps of incoming bandwidth, outputs 4K over HDMI, and holds 4 SATA hard drives of up to 16 TB each. Its AcuSeek function lets you search recordings by typing what you are looking for in plain language.

Key Features:
AcuSeek search: Type a description such as a person with a backpack or a red car, and the recorder finds matching results across its recordings. Per the datasheet, AcuSeek works on all channels when the connected cameras support Hikvision AcuSense with AcuSearch enabled, and models up to 50,000 targets per day. The search language is English.
AcuSearch and perimeter protection: Pick a person or vehicle from a snapshot and AcuSearch finds that target on all channels (camera must have AcuSearch enabled). AcuSense perimeter protection (line crossing and intrusion) filters alarms for humans and vehicles to reduce false alarms: by the recorder itself on 2 channels up to 4 MP or 1 channel at 5–8 MP, and on all channels when done by AcuSense cameras.
Facial recognition and Motion Detection 2.0: The recorder compares faces against up to 16 face libraries holding 50,000 face pictures in total, with face picture comparison on 8 channels. Motion Detection 2.0 classifies humans and vehicles so motion alarms are not triggered by leaves, pets or shadows; by the NVR it runs on all channels up to 4 MP (8 MP with enhanced SVC mode).

16 channels up to 12 MP: Connect up to 16 IP cameras with 160 Mbps incoming and 160 Mbps outgoing bandwidth. Recording resolutions go up to 12 MP, in H.265+, H.265, H.264+ and H.264, and 16 channels can be played back at the same time.
Gigabit network: Two 10/100/1000 Mbps RJ-45 ports connect the recorder to your network. This model has no built-in PoE ports, so cameras are powered through a PoE switch or their own power supplies.
4K HDMI and independent VGA: The HDMI output goes up to 4K (3840 × 2160) at 30 Hz and the VGA output up to 1080p at 60 Hz, and the two can show different content at the same time. You can view high-resolution cameras on a 4K screen without downscaling.
Storage and interfaces: Four SATA bays take hard drives of up to 16 TB each (drives sold separately). The recorder also has 16 / 4 alarm inputs/outputs, USB ports (Front: 2 × USB 2.0; Rear: 1 × USB 3.0), an RCA audio output with two-way audio, and 4 IP speaker inputs, plus 2 × RS-485 and 1 × RS-232 serial ports.
Who it's for / Works with: Hikvision IP cameras and third-party cameras via ONVIF (Profile S/G); AcuSeek/AcuSearch need Hikvision AcuSense cameras with AcuSearch enabled. Remote access through the Hik-Connect app.
Good to know
- Hard drives are not included; the recorder takes 3.5-inch SATA drives up to 16 TB per bay.
- AcuSeek and AcuSearch need Hikvision AcuSense cameras with AcuSearch enabled; the AcuSeek search language is English.
- No built-in PoE: cameras need a PoE switch or their own power supplies.
- Official datasheet revisions differ on the AC input range for this model, so the power input is not listed here; check the label on the unit.
- The datasheet lists regional variants such as (STD); they are the same product.
Technical Specifications:
| Model | DS-7716NXI-K4/VPro |
| Series | AcuSeek K VPro |
| Form factor | 1.5U |
| IP video input | 16-ch |
| Incoming bandwidth | 160 Mbps |
| Outgoing bandwidth | 160 Mbps |
| Video compression | H.265+ / H.265 / H.264+ / H.264 |
| Recording resolution | 12 MP / 8 MP / 6 MP / 5 MP / 4 MP / 3 MP / 1080p / UXGA / 720p / VGA / 4CIF / DCIF / 2CIF / CIF / QCIF |
| Synchronous playback | 16-ch |
| HDMI output | 1-ch, up to 4K (3840 × 2160) / 30 Hz; 2K / 60 Hz; 1080p / 60 Hz |
| VGA output | 1-ch, up to 1080p (1920 × 1080) / 60 Hz |
| Video output mode | HDMI / VGA independent output |
| Audio | 1 × RCA input (two-way audio), 1 × RCA output; 4 IP speaker inputs |
| Audio compression | G.711ulaw / G.711alaw / G.722 / G.726 / AAC / MP2L2 |
| AI by NVR | Facial recognition, perimeter protection, Motion Detection 2.0, AcuSearch, AcuSeek |
| AcuSeek | All channels (AcuSense cameras with AcuSearch enabled); up to 50,000 targets/day; search language English |
| Perimeter protection by NVR | Up to 4 MP: 2-ch; 5–8 MP: 1-ch (all channels by camera) |
| Face picture library / comparison | Up to 16 libraries, 50,000 pictures; comparison on 8-ch |
| Network interface | 2 × RJ-45 10/100/1000 Mbps |
| Remote connections | 128 |
| Network protocols | TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP, HTTP, HTTPS |
| PoE | None (external PoE switch required) |
| SATA | 4 × SATA |
| HDD capacity | Up to 16 TB per HDD |
| Serial interface | 2 × RS-485, 1 × RS-232 |
| Alarm in / out | 16 / 4 |
| USB | Front: 2 × USB 2.0; Rear: 1 × USB 3.0 |
| Power consumption | ≤ 50 W (without HDD) |
| Operating temperature | -10 °C to 55 °C |
| Operating humidity | 10% to 90% |
| Dimensions (W × D × H) | 440 × 391 × 72 mm |
| Weight | ≤ 5 kg (without HDD) |
📄 Datasheet: Download the official Hikvision DS-7716NXI-K4/VPro datasheet (PDF)
© متجر نصر – NaserTech Jordan