Hikvision DS-K1T805MBFWX | Outdoor Fingerprint & RFID Access Control Terminal
Hikvision DS-K1T805MBFWX | Outdoor Fingerprint & RFID Access Control Terminal
Couldn't load pickup availability
Hikvision DS-K1T805MBFWX | Outdoor Fingerprint & RFID Access Control Terminal
The Hikvision DS-K1T805MBFWX is a slim metal access control terminal that unlocks a door by fingerprint, M1 card, PIN code or Bluetooth. It is rated IP65 and IK08, connects by 10/100 Mbps Ethernet or 2.4 GHz Wi-Fi, and can be operated from the Hik-Connect mobile app.
Four ways to open the door: Users can identify themselves with a fingerprint, an M1 card, a PIN code or Bluetooth. This lets you give each person the method that suits them, for example cards for staff and PIN codes for occasional visitors.
Optical fingerprint reader: The optical fingerprint module supports 1:1 and 1:N comparison and recognises a fingerprint in under 1 second, so people pass the door without waiting.
Built-in M1 card reader: The terminal reads M1 cards at 0 to 4 cm in under 1 second. No separate card reader is needed at the door.
Large storage: It stores up to 3,000 fingerprints, 10,000 cards and 100,000 events, so it suits sites with many users and keeps a long record of who passed and when.
Built for outdoor entrances: The slim metal body is rated IP65 against dust and water and IK08 against impact, and it works from -30 °C to 60 °C.
App and web setup: The terminal works with the Hik-Connect app, and it can be configured in AP mode, through a PC web browser or through a mobile web page.
Wiring for the door and alarms: It has an RS-485 port with OSDP support, Wiegand 26/34, a lock output, exit button and door contact inputs, 2 alarm inputs, 1 alarm output and a tamper input.
Good to know
The built-in reader works with M1 cards and reads them at 0 to 4 cm, so the card has to be held close to the reader.
Wi-Fi is 2.4 GHz only (IEEE 802.11b/g/n).
The terminal runs on 12 VDC / 1 A with a power consumption of up to 12 W.
Technical Specifications
| Model | DS-K1T805MBFWX |
| Authentication | Card, fingerprint, PIN, Bluetooth |
| Card Type | M1 card |
| Card Reading Distance | 0 to 4 cm |
| Card Reading Time | < 1 s |
| Fingerprint Module | Optical, 1:1 and 1:N comparison |
| Fingerprint Recognition Time | < 1 s |
| Fingerprint Capacity | 3,000 |
| Card Capacity | 10,000 |
| Event Capacity | 100,000 |
| Operating System | Linux |
| Wired Network | 10/100 Mbps self-adaptive |
| Wi-Fi | 2.4 GHz, IEEE 802.11b/g/n/d/e/h/i |
| Bluetooth | Supported |
| Interfaces | 1 × RS-485 (OSDP), Wiegand 26/34, 1 × network port, 1 × lock output, 1 × exit button, 1 × door contact, 2 × alarm input, 1 × alarm output, 1 × tamper |
| Audio Output | 1 built-in buzzer |
| App / Configuration | Hik-Connect; AP configuration, PC web and mobile web |
| Protection | IP65, IK08 |
| Power Supply | 12 VDC / 1 A |
| Power Consumption | ≤ 12 W |
| Working Temperature | -30 °C to 60 °C |
| Working Humidity | 0% to 90% (non-condensing) |
| Dimensions | 57.7 × 177 × 34.6 mm |
| Languages | 12, including English and Arabic |
📄 Datasheet: Download the official Hikvision DS-K1T805MBFWX datasheet (PDF)
© متجر نصر – NaserTech Jordan