
HIKVISION DS-KD-MFB/S Fingerprint&Card reader sub module
The Hikvision DS-KD-MFB/S is a fingerprint and card reader sub-module (stainless steel version) for Hikvision modular door stations. It stores up to 1,000 fingerprints and 6,000 cards and reads M1 and DESFire cards at 13.56 MHz, so residents can open the door with a finger or a card. It is rated IP65.
Fingerprint unlock: Residents open the door with their fingerprint, so there is no card or key to lose. The module stores up to 1,000 fingerprints.
M1 and DESFire cards: The built-in 13.56 MHz reader accepts M1 and DESFire cards at a reading distance of about 20 mm, with a capacity of 6,000 cards.
Powered by the main unit: The module takes 12 VDC from the main module and uses up to 4 W, so it needs no separate power supply. It connects over RS-485.
Outdoor rated: IP65 protection and a working temperature of -30 °C to 60 °C.
Works with
Hikvision IP, 2-wire IP and 2-wire HD modular door stations, except DS-KD8003-IME2 (non-Y version).
Good to know
Not compatible with DS-KD8003-IME2 (non-Y version).
This is a sub-module: it needs a compatible main unit and a mounting bracket, both sold separately.
Fingerprints and cards are added from the web page of the door station main unit; cards can also be issued by swiping the main card first. Each person's access can be limited to a start and end time.
Before installation the module's address is set with its DIP switch (1 to 20, unique on the same main unit). It fits two-module and three-module frames, with the main unit in the top position.
Technical Specifications
| Model | DS-KD-MFB/S |
| Type | Fingerprint and card reader sub-module |
| Fingerprint Capacity | 1,000 |
| Card Capacity | 6,000 |
| Card Types | M1, DESFire |
| RFID Frequency | 13.56 MHz |
| Card Reading Distance | 20 mm |
| Interface | 1 × RS-485 |
| DIP Switch | 8 bits |
| Installation | Flush or surface mounting |
| Power | 12 VDC, supplied by the main module |
| Power Consumption | ≤ 4 W |
| Protection Level | IP65 |
| Working Temperature | -30 °C to 60 °C |
| Working Humidity | 10% to 90% (non-condensing) |
| Finish | Stainless steel front |
| Dimensions | 100 × 100 × 35 mm |
📄 Datasheet: Download the official Hikvision DS-KD-MFB/S datasheet (PDF)
Downloads
© متجر نصر – NaserTech Jordan