Hikvision Wired Glass Break Detector | DS-PDBG8-EG2

Hikvision Wired Glass Break Detector | DS-PDBG8-EG2

The Hikvision DS-PDBG8-EG2 is a wired acoustic glass break detector. An omni-directional microphone sensor listens for the sound of breaking glass and covers up to 8 m across a 120° angle. It runs on 9 to 16 VDC and gives a normally closed alarm output for wired alarm panels.

Key Features

Acoustic Detection: The omni-directional microphone sensor with digital processing detects glass breaking within 8 m and 120°. It covers float, plate, tempered, wired, laminated, leaded and double-glazed glass from 2.4 to 6.4 mm thick and from 0.3 × 0.3 m to 3 × 3 m in size.

Adjustable Sensitivity: Glass break sensitivity is set with a potentiometer, so the installer can tune the detector to the room and reduce unwanted triggers.

Clear LED Feedback: Three LEDs show what the detector hears: red for a high-frequency trigger, green for a low-frequency trigger and blue for an alarm. This makes walk testing during installation easier.

Selectable EOL Resistors: The alarm resistance can be chosen from 1K, 2K2, 4K7, 5K6 and 6K8, so the detector matches the end-of-line setup of your panel without extra resistors.

Wide Voltage Input and Tamper: It accepts 9 to 16 VDC (12 V typical) with reverse polarity protection against wiring mistakes. A front tamper protects the cover, and it can be mounted on a wall or ceiling.

Good to know

• This is a wired, indoor detector: it needs a 9 to 16 VDC supply and a wired zone on your alarm panel.
• Operating temperature is -10 °C to 55 °C.

Technical Specifications

📄 Datasheet: Download the official Hikvision DS-PDBG8-EG2 datasheet (PDF)

Hikvision cameras available in Jordan at the best price.

© متجر نصر – NaserTech Jordan