
Hikvision Wired 4-Way Low Current Relay Expander | DS-PM1-O4L-H
The Hikvision DS-PM1-O4L-H is a wired 4-way low current relay expander for the Hikvision AX Hybrid Pro alarm system. It connects directly to a 6-30 V source and opens or closes each circuit on command from the control panel over the Speed-X bus. Each relay handles up to 5 A.

4 Low-Current Relays: Four on-board relays support 6-30 V and up to 5 A each. The control panel switches them on command, for example to control connected equipment when an event happens.
Power Output: One power output supplies 9 to 12 VDC at up to 500 mA for connected devices.

Speed-X Bus with Cascading: Two Speed-X ports, one uplink to the control panel and one downlink to the next expander, let you chain expanders as the system grows.
Tamper and Status: Front and rear tamper protection reports any attempt to open the module, and power and fault LEDs show its status. A TTL serial port is also provided.
Who it's for / Works with
The Hikvision AX Hybrid Pro control panel, over the Speed-X bus.
Good to know
Needs an 11 to 24 VDC, 1 A power supply.
Operating temperature is -10 °C to 40 °C, so the module is meant for indoor installation.
Technical Specifications
| Model | DS-PM1-O4L-H |
| Relay outputs | 4 low current relays, 6-30 V, up to 5 A each |
| Power output | Max. 500 mA |
| Output voltage | 9 to 12 VDC |
| Bus | 2 × Speed-X (1 uplink to the control panel, 1 downlink to the next expander) |
| Serial port | 1 TTL serial port |
| Number of Ports | 3 (2 × Speed-X bus: 1 uplink, 1 downlink; 1 × TTL serial port) |
| Tamper | Front and rear |
| Power supply | 11 to 24 VDC, 1 A |
| Power consumption | Max. 153 mA, quiescent 70 mA @ 12 VDC |
| LED indicators | 1 power, 1 fault |
| Shell material | Plastic |
| Dimensions (W × H × D) | 110 × 155 × 32.5 mm |
| Weight | 285 g |
| Operating temperature | -10 °C to 40 °C |
| Operating humidity | 10% to 90% |
📄 Datasheet: Download the official Hikvision DS-PM1-O4L-H datasheet (PDF)
© متجر نصر – NaserTech Jordan