Hikvision Wireless PIR & Glass Break Detector | DS-PDPG12P-EG2-WB

Hikvision Wireless PIR & Glass Break Detector | DS-PDPG12P-EG2-WB

The Hikvision DS-PDPG12P-EG2-WB combines a passive infrared (PIR) motion detector and an acoustic glass break sensor in one wireless AX PRO device. It covers 12 m at 85.9° for motion and 8 m at 120° for breaking glass, ignores pets up to 30 kg, and runs on two CR123A batteries for up to 4 years of standby time.

Color: White

Two Detectors in One: The PIR sensor watches for movement up to 12 m away across 85.9° with 52 detection zones, while the acoustic sensor listens for breaking glass up to 8 m away. One device on the wall protects both the room and its windows, so you need fewer detectors for the same space.

Pet Immunity: Pet immunity is rated up to 30 kg, with Auto, High and Pet PIR sensitivity modes. Choosing the Pet mode helps the detector ignore animals in the house and reduces false alarms.

Many Glass Types: The glass break sensor is specified for float, plate, tempered, wired, laminated leaded and double-glazed glass from 2.4 mm to 6.4 mm thick, in panes from 0.3 x 0.3 m up to 3 x 3 m. Its sensitivity is set in levels that match the distance to the glass, from Level 2 (0 to 2 m) up to Level 6 (7.2 to 8 m).

Stable PIR Detection: Digital temperature compensation, creep zone protection, sealed optics and a 6500 lux white light filter keep PIR detection stable. Front and rear tamper protection reports attempts to open the detector or remove it from the wall.

Tri-X Two-Way Wireless: The detector talks to the AX PRO panel over two-way 433 MHz RF with frequency hopping, with up to 1 km range in free space. It is fully configurable remotely through the app and can be enrolled by power-up, remote ID or QR code.

Easy Battery Change: Two replaceable CR123A batteries give up to 4 years of standby time. The PCB is protected, so the batteries can be changed easily without touching the electronics.

Who it's for / Works with

The Hikvision AX PRO wireless alarm system (433 MHz -WB range). The control panel is sold separately.

Good to know

• Indoor, wall-mounted detector; the recommended mounting height is 1.8 to 2.4 m.
• Wall and ceiling brackets (DS-PDB-IN-Wallbracket, DS-PDB-IN-Ceilingbracket) are optional accessories and are sold separately.
• Hikvision notes that glass break sensitivity Level 8 is more sensitive but is not compliant with EN50131-2-7-1.

Technical Specifications

📄 Datasheet: Download the official Hikvision DS-PDPG12P-EG2-WB datasheet (PDF)

Hikvision cameras available in Jordan at the best price.

© متجر نصر – NaserTech Jordan