TP-Link Outdoor Wifi Access Point AX3000 | EAP650-Outdoor

TP-Link Outdoor Wifi Access Point AX3000 | EAP650-Outdoor

The TP-Link Omada EAP650-Outdoor is an AX3000 dual-band Wi-Fi 6 access point in a weatherproof housing, made for outdoor areas such as yards, terraces, parking lots and campuses. It is powered over its Gigabit Ethernet port by 802.3at PoE or by the included 48 V passive PoE adapter, and is managed through the Omada platform.

Wi-Fi 6 on 2.4 GHz and 5 GHz: It supports IEEE 802.11ax/ac/n/g/b/a with OFDMA, MU-MIMO, 1024-QAM and beamforming. Wi-Fi 6 lets the access point serve many devices at the same time more efficiently, which matters in busy outdoor spaces.

One cable for power and data: The single Gigabit Ethernet port accepts 802.3at PoE from a PoE+ switch or 48 V passive PoE from the included adapter, so you only need one cable to the mounting point.

Built for outdoor installation: The weatherproof enclosure, 2 × 4 dBi (2.4 GHz) and 2 × 5 dBi (5 GHz) antennas and the included pole and wall mounting kits let you install it on a mast or an outside wall. It operates from -30 °C to 70 °C.

Omada SDN management: The access point is managed with the Omada app, the web interface, or an Omada hardware, software or cloud-based controller, so you can configure and monitor many access points from one place.

Mesh and seamless roaming: With an Omada controller it supports Omada Mesh to extend Wi-Fi wirelessly where cables are hard to run, and seamless roaming (802.11k/v/r) so devices move between access points without dropping.

Business security features: It supports WPA3-Personal/Enterprise, 802.1X, captive portal authentication, SSID-to-VLAN mapping, wireless client isolation and rogue AP detection, with up to 16 SSIDs (8 per band).

Who it's for / Works with

Omada controllers (hardware, software or cloud-based) and the Omada app; 802.3at PoE+ switches or the included passive PoE adapter.

Good to know

• The included passive PoE adapter is for dry indoor use only.
• Omada Mesh, seamless roaming, cloud access and captive portal require an Omada SDN controller.
• Per TP-Link, hardware version v1.0 does not support the Omada Cloud-Based Controller.
• Wi-Fi 6 features (OFDMA, 1024-QAM) need clients that also support them; real throughput depends on the environment.

Technical Specifications

© متجر نصر – NaserTech Jordan