
Ruijie Reyee 2.4GHz 300Mbps Outdoor Wireless Bridge Kit (Pair), 500m Point-to-Point | RG-EST100-E
The Ruijie Reyee RG-EST100-E is a pre-paired kit of two 2.4 GHz dual-stream (2×2 MIMO) outdoor wireless bridges that link two points up to 500 m apart without running a cable. Each unit has an 8 dBi built-in directional antenna, two 10/100 Mbps Ethernet ports and an IP55 weatherproof housing, and the kit includes two 12 V PoE adapters.

Ready out of the box: the two bridges come paired from the factory, so there is no complex configuration or alignment software; Ruijie also supports one-touch pairing (within 20 m) if you need to pair again. Three signal-status LEDs on each unit show the link quality.
Made for CCTV links: Ruijie rates the link at about 60 Mbps at 100 m and 30 Mbps at 500 m (HT20), enough for up to 10 × 3 MP cameras at 100 m or 5 × 3 MP cameras at 500 m. The second Ethernet port lets you connect two devices at the remote end.

Built for outdoors: IP55 weatherproof, rust-proof design, operating from −30 °C to +60 °C, with ±6 kV surge protection on the service port and gold-plated ports. Fluorescent stickers make the units easy to identify in the dark. Mounts on a wall or pole.

Monitor from the cloud: both bridges can be managed through the web interface (eWeb), the Ruijie Reyee App and Ruijie Cloud, with real-time signal strength, bridge speed test and remote restart.

Where to use it
Use it wherever you need to carry a network connection up to 500 m without digging or running cable, for example:
◆ Farms: send the internet or a camera feed from the main house to a barn, well or remote building.
◆ Villa gate / guard room: connect a gate camera or a guard room to the main building's network.
◆ Parking areas: bring parking cameras back to the NVR without trenching across the lot.
◆ Remote CCTV camera: link a single far camera (or a small group) to the recorder side; Ruijie rates up to 5 × 3 MP cameras at 500 m.
Ruijie's own listed scenarios are elevators, campuses, apartment complexes and tower cranes.
Good to know: the Ethernet ports are 10/100 Mbps and the bridge works on 2.4 GHz only. 300 Mbps is the maximum wireless data rate; the real bridge throughput is 60 Mbps at 100 m and 30 Mbps at 500 m per Ruijie. It is a point-to-point kit (one link, maximum 500 m). If you use a third-party power supply, it must be 12 V (DC or 12 V passive PoE); it is not standard 802.3af PoE.
What's in the Box
◆ 2 × RG-EST100-E bridges (paired)
◆ 2 × 12 V PoE adapters
Technical Specifications
| Specification | Ruijie RG-EST100-E |
|---|---|
| Wi-Fi standard | IEEE 802.11b/g/n (Wi-Fi 4), 2.4 GHz (2.400–2.483 GHz) |
| Radio | Single radio, 2 spatial streams (2×2 MIMO); channel width Auto/20/40 MHz |
| Max wireless data rate | 300 Mbps |
| Bridge performance | 60 Mbps at 100 m, 30 Mbps at 500 m (HT20) |
| Maximum bridge distance | 500 m (point-to-point) |
| Recommended cameras (3 MP) | 10 at 100 m / 5 at 500 m |
| Recommended cameras (4–5 MP) | 6 at 100 m / 3 at 500 m |
| Antenna | Built-in directional, 8 dBi, 70° horizontal / 70° vertical |
| Ethernet ports | 2 × 10/100BASE-T (LAN1/PoE, LAN2) |
| Power | 12 V DC (1 A) or 12 V passive PoE; max 5 W per unit |
| Encryption | WPA2-PSK |
| Management | eWeb, Ruijie Reyee App, Ruijie Cloud |
| Mounting | Wall / pole |
| IP rating | IP55 |
| Surge protection | Service port ±6 kV; power connector ±4 kV common / ±2 kV differential mode |
| Operating temperature | −30 °C to +60 °C |
| Dimensions (W × D × H) | 68.7 × 42 × 165.5 mm (per unit) |
| Weight | 0.14 kg (per unit) |
| Colour | White |
| Certifications | CE, FCC, CB, ISED, cTUVus |
📄 Datasheet: Download the official Ruijie RG-EST100-E datasheet (PDF)
Ruijie Technical Support
Ruijie Networks offers official technical support on WhatsApp: WhatsApp +86 181 1310 8941 (24/7 AI assistant; live agents Monday–Friday).
© متجر نصر – NaserTech Jordan