TP-Link® Omada PoE++ Injector, 60W, 2 Gigabit Ports | POE170S

TP-Link Omada PoE++ Injector, 60W, 2 Gigabit Ports | POE170S

The TP-Link Omada POE170S (also listed as TL-POE170S) is a PoE++ injector that adds power to a normal Ethernet link. It complies with IEEE 802.3af/at/bt (type 3) and supplies up to 60 W over one Ethernet cable through its Gigabit power + data output port.

Up to 60 W PoE++: The output port delivers up to 60 W, enough for higher-power PoE devices. TP-Link names PTZ IP cameras, access points and LED devices as typical loads.

Automatic power detection: The injector detects the connected 802.3af/at/bt device and automatically determines and supplies the exact power the device needs.

Two Gigabit ports: One 10/100/1000 Mbps Data In port connects to your switch or router, and one 10/100/1000 Mbps Power + Data Out port connects to the powered device up to 100 m away.

Built-in power supply, metal casing: It has an integrated power supply that plugs straight into AC power (100-240 V), needs no configuration, and can be placed on a desk or mounted on a wall.

Who it's for / Works with: Adding PoE power to one device when your switch has no PoE, or not enough PoE budget, for example a PTZ camera or a Wi-Fi access point.

Good to know: The POE170S works only with standard IEEE 802.3af/at/bt devices; it is not compatible with passive PoE or other non-standard PoE devices.

Technical Specifications

📄 Datasheet: Download the official TP-Link POE170S datasheet (PDF)