
UGREEN DP Male to VGA Male Cable 1.5M | 10247
The UGREEN DP105 (item 10247) is a 1.5 m cable with a DisplayPort male plug on one end and a VGA male plug on the other. It connects a computer, laptop or graphics card with a DisplayPort output to a VGA monitor, TV or projector, at up to 1920 x 1200 or 1080p at 60 Hz.

Conversion built into the cable: A converter inside the cable turns the digital DisplayPort signal into an analog VGA signal, so you do not need a separate adapter plus a VGA cable. It takes its power from the DisplayPort port (+3.3 V), so no external power supply is needed; UGREEN measures 1.4 W when active and 100 mW in standby.

Full HD picture: The VGA output supports resolutions up to 1920 x 1200 and HDTV resolutions up to 1080p at 60 Hz, which covers typical office monitors and projectors.

Automatic detection and EDID: The cable detects the connected VGA display automatically and supports a standby mode. EDID pre-fetch passes the monitor's information to the computer so it can pick a suitable resolution, and spread-spectrum clocking reduces electromagnetic interference.
Gold-plated plugs: The connectors are gold-plated.

Good to know
The cable works in one direction only: from a DisplayPort source to a VGA display. It cannot connect a computer with a VGA output to a DisplayPort monitor or projector.
Technical Specifications
| Model | DP105 |
| Item Number | 10247 |
| Connectors | DisplayPort male to VGA male |
| Length | 1.5 m |
| Max Resolution | 1920 x 1200, 1080p@60Hz |
| Direction | DisplayPort source to VGA display only |
| Power | From the DisplayPort port (+3.3 V) |
| Power Consumption | Active 1.4 W, standby 100 mW |
| VGA Output | Analog RGB, 700 mV voltage swing |
| Plugs | Gold-plated |
| Color | Black |
© متجر نصر – NaserTech Jordan