Best Smart Thermostat in Jordan: Boilers, Water Heaters and Underfloor Heating
Looking for the best smart home thermostat in Jordan? Winter heating here comes in many forms: gas or diesel boilers with radiators, electric or water underfloor heating, electric water heaters and split ACs on heat mode. A smart thermostat lets you turn the heating on before you get home, run weekly schedules and check the room temperature from your phone, but only if it matches your heating system and its electrical load.
This guide explains how to choose a smart thermostat for a boiler, underfloor heating or a water heater, how to read load ratings safely, and which Tuya and SONOFF devices fit each job. Instead of chasing a "top rated smart thermostat" list, start with your system.
Quick picks
| Product | Best for | Key feature (from the store description) |
|---|---|---|
| Tuya Smart WiFi Thermostat | Boilers and underfloor heating over Wi-Fi | 16A, 3A dry contact and 3A NO/NC versions |
| SONOFF Thermostat Core (TP-WGZBA) | Water underfloor heating and boilers (Zigbee) | 3A actuator relay plus a boiler dry contact |
| SONOFF TRV Gen2 (TRV-ZBT) | Room-by-room radiator control | Colour display, open-window detection |
| SONOFF TRVZB | Grouping several radiators | 4°C to 35°C range, group control |
| SONOFF TH Elite THR320D with THS01 sensor | Electric heating controlled by room temperature | 20A, LCD, dry contact 5-30V 1A |
| SONOFF TH Origin THR316 | Temperature-based control up to 16A | 8 automatic programs |
| Tuya Smart Switch 20A with Timer | Electric water heaters | 20A, timer, no hub needed |
| SONOFF POWR320D | Water heaters with energy readings | 20A, LCD, overload limits |
| SONOFF POWR3 | Larger heating loads | 25A / 5500W |
| SONOFF S60TPF Smart Plug | Plug-in electric heaters | 16A / 4000W with energy monitoring |
| Smart WiFi IR Remote | Split air conditioners | Learning function, 4000+ brands |
| SONOFF Zigbee Bridge Pro / NSPanel Pro | Gateway for Zigbee devices | Up to 128 devices / built-in Zigbee 3.0 gateway |
Prices change, so they are shown on each product page.
What does a smart thermostat actually do?
A thermostat measures the temperature and switches the heat source on or off to hold the temperature you set; a smart (Wi-Fi or Zigbee) model adds app control, schedules and automations. Heating controllers switch heat in one of three ways:
- Wet (powered) contact: the relay carries the heater's full current, as with electric underfloor heating, so its rating (16A, 20A) must be higher than the load.
- Dry (volt-free) contact: the relay only closes a control circuit, like a simple wall thermostat, to tell a boiler to start. It must never carry a heater's load.
- Radiator valve heads (TRVs): battery-powered heads that open and close the hot-water flow into each radiator.
How to choose a smart thermostat for your heating system
Gas or diesel boiler (central heating)
Many boilers have room-thermostat terminals that expect a dry contact, such as the 3A dry-contact Tuya Smart WiFi Thermostat or the boiler output of the SONOFF Thermostat Core. Check the boiler manual first: these terminals can carry mains or low voltage, and the contact must be rated for it. Some central heating systems switch a circulation pump or burner directly at 230 V instead; there, ask a heating technician which output to use.
Radiators in every room
Smart radiator valves replace the thermostatic head on each radiator. The SONOFF TRV Gen2 and TRVZB fit M30 × 1.5 mm valves with the included adapters. A radiator with only a plain manual valve may first need a thermostatic valve body fitted by a plumber.
Electric underfloor heating
Electric mats draw their full current through the thermostat, so use a wet-contact model such as the 16A Tuya version. Add up the wattage of all mats; if the current exceeds the thermostat's rating, an electrician can add a suitably rated contactor.
Water (hydronic) underfloor heating
Here the thermostat drives zone valves or actuators on the manifold. The Tuya 3A (NO/NC) version is made for them (choose NO or NC to match your system), and the SONOFF Thermostat Core drives actuators up to 3A while starting the boiler through its separate dry contact.
Electric water heater
A water heater already has its own thermostat. What you want is a smart water heater controller that decides when it gets power, using a timer or schedule. Choose a high-load switch rated well above the heater's current (see the next section).
Split air conditioners
A smart IR remote is the simplest smart air conditioner controller. It sends the same infrared commands as the original remote, so you keep the AC's own temperature control, which a power switch cannot give you.
Wi-Fi or Zigbee?
Wi-Fi devices connect directly to your router on 2.4 GHz with no hub, which is why many people looking for the best WiFi thermostat start there. Zigbee devices need a gateway, but Zigbee uses very little power, which is why battery-powered radiator valves rely on it.
Wiring safety and load ratings
- Work out the current. Current (A) = power (W) ÷ voltage (V). On Jordan's 230 V supply, a 1,500 W heater draws about 6.5 A, a 2,000 W water heater about 8.7 A and a 3,000 W water heater about 13 A. Check your appliance's rating plate.
- Leave headroom. Heating runs for hours at full load. A common rule of thumb is to keep a continuous load at no more than about 80% of the device's rating, so a 3,000 W water heater is better on a 20A device than a 16A one.
- Respect wet and dry contacts. Never connect mains power or a heater to a dry-contact output, and never run a heating load through a 3A control model.
- Keep the breaker. A smart switch does not replace the circuit breaker or isolator. Use cable sized for the circuit and tighten terminals firmly, because loose connections overheat under heavy loads.
- Neutral and earth. Most Wi-Fi relays need live and neutral to power themselves. Keep the appliance earthed and never bypass a water heater's own thermostat or safety cut-out.
- Use a professional. Switch off the breaker before any work, and have a qualified electrician (and a heating technician for boilers) do the installation.
Our smart heating control picks
Tuya Smart WiFi Thermostat
A wall thermostat for the Tuya Smart app with 5+2, 6+1 or 7-day programs, a dimmable backlight that can be switched off, and precision up to ±0.5°C. Choose the 16A (NO) version for electric underfloor heating, 3A dry contact (NO) for gas boilers and central HVAC, or 3A (NO/NC) for zone valves and actuators. The 3A models must not power high-load devices.
Good for: boilers and underfloor heating controlled over Wi-Fi.
SONOFF Thermostat Core (TP-WGZBA)
A flush-mounted Zigbee 3.0 thermostat for water heating and boilers, with a relay output for actuators (up to 3A resistive), a separate boiler dry contact, a physical dial, three weekly plans, window-open detection, child lock and anti-freeze mode. It needs a SONOFF Zigbee gateway and is not meant for electric heating mats, which its description says generally exceed 3A.
Good for: water underfloor heating with a boiler.
SONOFF TRV Gen2 (TRV-ZBT) and TRVZB
Battery-powered Zigbee radiator valves. The TRV Gen2 is the more compact model, with a rotating colour display, three weekly plans, open-window detection, child lock, anti-scale and anti-freeze modes, and runs on two AA batteries. The TRVZB has an LED screen, a 4°C to 35°C range, group control and frost protection, uses three AA batteries (not included) and works with hubs such as the Zigbee Bridge Pro and NSPanel Pro.
Good for: room-by-room control of central heating radiators.
SONOFF TH Elite THR320D and TH Origin THR316
Wi-Fi switches that become a thermostat for electric heating: connect a THS01 sensor and set up to 8 automatic programs that switch the load at temperature thresholds. The THR320D handles up to 20A, has an LCD and adds a dry contact rated 5-30V, 1A for low-voltage control terminals; the THR316 handles up to 16A.
Good for: electric heaters or electric floor heating controlled by room temperature.
Tuya Smart Switch 20A with Timer
A 20A Wi-Fi switch made for high loads such as water heaters, with a timer, schedules in the Tuya Smart app and Alexa or Google Assistant voice control. It connects straight to 2.4 GHz Wi-Fi, so no hub is needed.
Good for: heating water only before you need it.
SONOFF POWR320D and POWR3
The POWR320D (20A) displays live power, current, voltage and energy on an LCD, turns the appliance off when your set limits are exceeded and stores 6 months of data. The POWR3 is rated 25A / 5500W for bigger loads, with schedules and up to 100 days of energy history.
Good for: heavy loads when you want energy readings as well as control.
SONOFF S60TPF Smart Plug 16A
For plug-in electric heaters, the S60TPF supports up to 4000W (16A), tracks energy in eWeLink, runs schedules and countdown timers, and switches off when the current reaches 16A.
Good for: portable heaters well within the plug's rating.
Smart WiFi IR Remote
Uses the app's IR code library (4000+ brands listed) or learns keys from your original remote, then lets you switch the AC on and set the temperature from the Tuya Smart app, by voice or by automations based on time or weather. It does not work with RF or Bluetooth remotes.
Good for: warming or cooling a room before you arrive.
SONOFF Zigbee Bridge Pro and NSPanel Pro
The Zigbee Bridge Pro supports up to 128 Zigbee devices and can run local scenes when Wi-Fi is unstable. The NSPanel Pro is a wall panel with a built-in Zigbee 3.0 gateway and a smart temperature control feature that builds a thermostat from a temperature source and a heating device. Check SONOFF's compatibility list for each valve or thermostat before buying.
Good for: the hub of a SONOFF heating setup.
Setting up your smart thermostat
Add Tuya devices in the Tuya Smart (or Smart Life) app and SONOFF devices in eWeLink, on your router's 2.4 GHz network. For Zigbee devices, add the gateway first, then the valve or thermostat, and finish with the weekly schedule.
Tips to save energy with smart heating
- Lower the temperature at night and while the house is empty, and let the schedule warm it up before you wake up or get home.
- Run the water heater around the times you actually use hot water.
- Turn on open-window detection so heating stops while you air a room.
- Place temperature sensors away from radiators, direct sunlight and outside walls.
Frequently asked questions
What is the best smart thermostat for a boiler in Jordan?
One with a dry-contact output for the boiler's thermostat terminals. The 3A dry-contact Tuya Smart WiFi Thermostat is a strong choice for Wi-Fi control without a hub, and the SONOFF Thermostat Core suits SONOFF Zigbee setups. Prices are shown on each product page.
What is the best WiFi thermostat for underfloor heating?
For electric underfloor heating, the 16A Tuya Smart WiFi Thermostat switches the mats directly. For water underfloor heating, use the 3A (NO/NC) version or the Zigbee SONOFF Thermostat Core. Always check the total wattage against the rating.
Which smart home thermostat controls radiators room by room?
Smart radiator valves such as the SONOFF TRV Gen2 or TRVZB, connected to a SONOFF Zigbee gateway.
What is the best smart water heater controller?
A high-load switch rated well above the heater's current. A 3,000 W water heater draws about 13 A, so a 20A device such as the Tuya Smart Switch 20A with Timer or the SONOFF POWR320D is a strong choice.
What is the best smart air conditioner controller?
For split ACs, a smart IR remote such as the Smart WiFi IR Remote, because it keeps the AC's own temperature control and adds app, voice and scheduled control.
Can I install a smart thermostat myself?
They are wired to mains power and sometimes to a boiler, so have a qualified electrician or heating technician install them.
Browse all smart thermostats and heating controls at NaserTech to compare models and see current prices. Planning more smart upgrades? Read our guide to turning your home smart in Jordan and our SONOFF smart home guide.



