Tapo C310 outdoor Wi-Fi security camera

How to Install Security Cameras in Jordan: Step-by-Step Guide

Knowing how to install security cameras properly is what turns a box of equipment into a system you can trust. A badly placed camera, a cable joint open to the rain or a recorder without a working hard drive are the usual reasons footage is missing when you need it. This guide explains how to install security cameras in Jordan step by step, the way professional installers do it, whether you choose Wi-Fi cameras or a wired PoE or analog CCTV system: planning and placement, cabling, the NVR or DVR recorder, and watching your cameras on your phone.

If you are still choosing equipment, browse our wired surveillance systems and Wi-Fi cameras. The products below are examples from those collections; prices are shown on each product page.

Quick picks: what each part of the system does

Part Example Why it fits
Indoor Wi-Fi camera EZVIZ H6C Pro 3MP 340° pan and 55° tilt with auto tracking
Outdoor Wi-Fi camera Tapo C310 Wi-Fi or Ethernet, IP66
PoE IP camera Hikvision DS-2CD1043G2-LI 4MP, PoE, IP67
NVR (IP recorder) Hikvision DS-7104NI-Q1/M 4 IP channels up to 6MP
PoE switch Hikvision DS-3E1105P-EI/M 4 PoE ports, 45W budget
NVR with built-in PoE IMOU N110-4P Cameras plug straight into the recorder
Analog camera and DVR Hikvision DS-2CE16K0T-EXLPF with DS-7204HQHI-M1/X 3K camera with a 4-channel AcuSense DVR
Network cable Hikvision CAT6 / Dahua outdoor CAT6 Copper conductors, 305 m reels
Coax cable Coaxial cable with power Video and 12V power in one run
Storage WD Green hard drive / Micro SD 100MB/s Recorder drive / camera card
Monitor Hikvision 22" DS-D5022FN-C 1080p with HDMI and VGA

Step 1: Choose Wi-Fi, PoE or analog

Wi-Fi cameras

Each camera needs a power socket and a good Wi-Fi signal, records to a micro SD card or the cloud, and is watched in the brand's app. This is the easiest option for apartments and renters who cannot run cables. Most home Wi-Fi cameras connect on 2.4 GHz only, and concrete and stone walls weaken the signal, so check coverage before you drill.

Wired PoE (IP) systems

One network cable per camera carries power and video (Power over Ethernet) to a PoE switch or an NVR with PoE ports. The NVR records every camera to a hard drive around the clock, without depending on Wi-Fi. This suits villas, shops, building entrances and anyone installing four or more cameras.

Analog (DVR) systems

Analog HD cameras send video over coaxial cable to a DVR, with power on a separate pair of wires or an adapter. It is a common choice when upgrading an older system and reusing existing coax runs.

Step 2: Plan camera placement

Where to put cameras

Start with the entry points: front door, gate, garage, back door and ground-floor windows, then the driveway. Indoors, cover the entrance hall and main living area rather than private rooms. Sketch each camera, its view, the cable route and the recorder location.

Height, angle and light

Mount cameras about 2.5 to 3 metres high: out of easy reach but low enough to see faces. Tilt them slightly down, and avoid pointing at the sun, a bright street light or through a glass window, because infrared light reflects off glass at night. A camera covering a doorway from a few metres away identifies people far better than one wide view of the whole yard; our DORI guide explains detection and identification distances.

Respect privacy

Point cameras at your own property. Avoid neighbours' windows, gardens and more of the public street than you need, and let family members or staff know where cameras are.

Step 3: How to install Wi-Fi cameras

  1. Check the signal. Stand at each spot with your phone on the 2.4 GHz network. If the signal is weak, move the router or add an extender or mesh unit.
  2. Set up before mounting. Insert the micro SD card, power the camera near the router, add it in the app and update the firmware.
  3. Mark and drill. Use the mounting base as a template, check for hidden pipes and electrical cables, and use wall plugs and screws suited to concrete or stone.
  4. Run power neatly. Use the supplied adapter, keep it indoors or in a weatherproof box, and leave a small downward loop in outdoor cables so water drips off before reaching the camera.
  5. Aim and test. Adjust the angle on the live view, set detection zones and check a night recording.

Tapo C310 outdoor Wi-Fi security camera

Step 4: How to install a wired PoE camera system

  1. Place the recorder. Choose a ventilated, secure indoor spot near the router, away from the front door. Fit the hard drive with the power off.
  2. Pull the cables. Run one cable from each camera position to the switch or NVR. Keep every run under 100 metres (the Ethernet limit), use conduit or trunking outdoors, avoid sharp bends and leave spare length at both ends.
  3. Terminate and test. Crimp RJ45 plugs using the same wiring standard on both ends (usually T568B) and check every cable with a tester before mounting the cameras.
  4. Mount and seal. Hide outdoor connectors in a waterproof junction box, use the camera's waterproof cap on the RJ45 joint and seal every cable entry.
  5. Connect. Plug the cameras into the PoE ports, then connect the switch's uplink and the NVR to your router so everything is on one network. Make sure the cameras' total power stays within the switch's PoE budget.
  6. Power up. Create a strong admin password on first start, let the NVR find the cameras and set the recording schedule.

Hikvision DS-3E1105P-EI/M 5-port PoE switch for IP cameras

Installing an analog DVR system

Planning is the same, but each camera gets a coaxial cable with a power pair. Fit BNC connectors on the video core, connect the power pair to a 12V DC supply and plug the BNC into the DVR. Voltage drops over long, thin power wires, so follow the camera and cable limits, and choose a DVR that supports your cameras' resolution and signal format.

Cable, power and safety

Which cable is best for security cameras?

For IP cameras, use Cat6 cable with solid copper conductors; copper-clad aluminium (CCA) cable has higher resistance, which causes more voltage drop on long PoE runs. Use cable with an outdoor jacket for runs outside. Analog cameras use coax with a power pair. Our Cat6 vs Cat7 vs Cat8 guide covers network cable in more detail.

Electrical safety

Camera cables are low voltage, but any new mains socket or wiring should be done by a qualified electrician with the power off. Use a stable ladder with someone holding it, and keep indoor adapters out of the weather.

Set up the recorder, hard drive and screen

On first start, most NVRs and DVRs ask you to create an admin password. Then set the correct date and time, initialize the hard drive from the storage menu, choose continuous or motion recording, and make sure overwrite is enabled so the oldest footage is replaced when the drive is full. To work out how many days you can record, see our micro SD and NVR hard drive guide. For a local screen, any monitor with an HDMI or VGA input that matches your recorder's output will work.

Hikvision DS-7104NI-Q1/M 4-channel NVR

Step 5: Set up security cameras on your phone

  1. Install your brand's app: Hik-Connect for Hikvision recorders, EZVIZ, Tapo or Imou Life.
  2. Create an account and log in.
  3. Tap "+" and scan the QR code on the device label. Many recorders also show it in their network or platform-access menu.
  4. For Wi-Fi cameras, connect your phone to the 2.4 GHz network and enter the Wi-Fi password when asked. For Hikvision recorders, enable Hik-Connect on the recorder first, then enter the verification code.
  5. Turn on notifications and set person or vehicle detection where the camera supports it.

These apps connect through the maker's cloud service, so you normally do not need to open ports on your router. Change default passwords and keep firmware updated.

Recommended equipment

EZVIZ H6C Pro 3MP indoor camera

The EZVIZ H6C Pro pans 340° and tilts 55°, follows people automatically and has two-way audio. It offers colour night vision up to 5 m and IR up to 10 m, a privacy mode and micro SD support up to 512GB.

Good for: living rooms, shops and checking on family from your phone.

EZVIZ H6C Pro indoor pan and tilt Wi-Fi camera

Tapo C310 outdoor camera

The Tapo C310 records 3MP video, connects by Wi-Fi or Ethernet and is rated IP66. It has night vision up to 30 m, person detection, a sound and light alarm and a micro SD slot up to 512GB.

Good for: a gate, garden or entrance where Wi-Fi reaches, with the option of a cable later.

Hikvision DS-2CD1043G2-LI PoE camera

The DS-2CD1043G2-LI is a 4MP bullet camera powered over PoE, with Smart Hybrid Light for colour images at night up to about 30 m, an IP67 housing and ONVIF support.

Good for: wired systems covering entrances, driveways and shop fronts.

Hikvision DS-7104NI-Q1/M NVR with DS-3E1105P-EI/M PoE switch

The DS-7104NI-Q1/M records 4 IP cameras up to 6MP, has HDMI and VGA outputs and takes one SATA drive up to 6TB. The DS-3E1105P-EI/M powers four cameras (up to 30W per port, 45W total) and restarts unresponsive cameras automatically.

Good for: a four-camera Hikvision system for a home or small shop.

IMOU N110-4P PoE NVR

The IMOU N110-4P has a built-in PoE switch with 4 ports, records up to 10 channels with cameras up to 8MP, and takes one hard drive up to 16TB (not included). It is managed in the Imou Life app.

Good for: a tidy wired setup without a separate switch.

Hikvision analog camera and DVR

The DS-2CE16K0T-EXLPF records 3K (2960 × 1665), has Smart Hybrid Light up to about 20 m, an IP67 housing and runs on 12V DC. The DS-7204HQHI-M1/X DVR has 4 analog inputs, AcuSense human and vehicle classification and one SATA port up to 10TB.

Good for: upgrading an older coax system.

Cable and storage

The Hikvision CAT6 reel has a solid copper conductor for indoor runs, and the Dahua PFM920-6UN has a pure copper conductor and black PE outdoor sheath. For analog cameras, the coaxial cable with power combines RG58 with a 2 × 0.5 mm² power pair. The WD Green is a 3.5-inch SATA drive for NVRs and DVRs, and the Micro SD 100MB/s card is U1 / Class 10.

Good for: completing the system in one order.

Frequently asked questions

How do I install security cameras myself?

Plan camera spots and cable routes, test each camera or the recorder before mounting, then mount, seal and aim. Wi-Fi cameras are the easiest DIY job; wired systems need cable pulling and connector work.

What is the best cable for security cameras?

Cat6 with solid copper conductors for IP and PoE cameras, with an outdoor-rated jacket for outside runs, and coax with a power pair for analog cameras. Avoid CCA network cable for long PoE runs.

What is the best screen for security cameras?

Any monitor with HDMI or VGA input works with most recorders. The Hikvision 22" DS-D5022FN-C is a strong choice: 1920 × 1080 resolution, HDMI and VGA inputs, a 178° viewing angle and VESA wall-mount support.

What is the best security camera to watch from my phone?

Every Wi-Fi camera works through its app. The EZVIZ H6C Pro is a strong choice indoors and the Tapo C310 outdoors; wired Hikvision systems use Hik-Connect.

How do I set up security cameras on my phone?

Download your brand's app, create an account, tap "+" and scan the QR code on the camera or recorder, then follow the prompts. Wi-Fi cameras need your phone on the 2.4 GHz network during setup.

How do I choose a security camera installer?

Look for an installer who explains the camera plan before drilling, uses solid copper cable and sealed outdoor joints, tests every camera at night, and hands over the admin passwords and app access to you.

Do wired cameras work without internet?

Yes. The NVR or DVR keeps recording to its hard drive and shows live video on a monitor without internet. Internet is needed only for remote viewing and phone alerts.

Ready to start? Browse our wired surveillance systems for PoE and analog kits, or our Wi-Fi cameras for quick DIY setups. For storage and cabling, read our camera storage guide and our Ethernet cable guide. If your system is Hikvision, our Hik-Connect setup guide shows how to connect the recorder and cameras to your phone.

Back to blog