TP-Link® Omada BE9300 Tri-Band Wi-Fi 7 Outdoor Access Point, IP68 | EAP772-Outdoor

TP-Link Omada BE9300 Tri-Band Wi-Fi 7 Outdoor Access Point, IP68 | EAP772-Outdoor

The TP-Link Omada EAP772-Outdoor is a tri-band Wi-Fi 7 (802.11be) omnidirectional access point for indoor and outdoor areas. The EU/Middle East version is rated BE9300 with 688 Mbps on 2.4 GHz, 2882 Mbps on 5 GHz and 5765 Mbps on 6 GHz, and it has a fully sealed IP68 enclosure, one 2.5G PoE+ port and a recommended coverage of 300 m² (3,200 ft²).

Color: White

Key Features

Tri-band six-stream Wi-Fi 7: Three radios (2.4 GHz, 5 GHz and 6 GHz), each 2×2, work at the same time. Wi-Fi 7 features such as Multi-Link Operation (MLO), 320 MHz channels on 6 GHz, 4K-QAM, Multi-RU and preamble puncturing give compatible devices higher speed and lower latency.

True tri-band omnidirectional coverage with 6 GHz: Omnidirectional internal antennas (2.4 GHz 2× 4 dBi with dual-polarized design, 5 GHz 2× 6 dBi, 6 GHz 2× 6 dBi) spread the signal all around the unit, with 300 m² recommended coverage and 380+ concurrent clients according to TP-Link. Outdoor use of the 6 GHz band is unlocked by AFC where AFC is available.

IP68 weatherproof design: The fully sealed housing is rated IP68: completely dustproof and protected against immersion in water, so it can withstand harsh outdoor conditions on walls and poles.

2.5G PoE+ port: One 2.5 Gigabit RJ45 port receives both data and 802.3at PoE+ power over a single cable (max. 21.5 W), so there is no need to run a power line to the mounting point.

Wall and pole mounting: Pole and wall mounting kits are included in the box, along with a waterproof kit for the cable entry.

Omada SDN, mesh and roaming: The EAP772-Outdoor is adopted in one click by Omada SDN and can be managed via the Omada app, web browser, or the Omada Software, Hardware and Cloud-Based Controllers. With a controller it supports Omada Mesh, seamless roaming (802.11k/v/r), cloud access and captive portal.

Business-class security: Up to 24 SSIDs (8 per band), WPA/WPA2/WPA3 Personal and Enterprise, OWE, 802.1X, SSID-to-VLAN mapping, client isolation, MAC filtering and rogue AP detection.

Who it's for / Works with

Outdoor Wi-Fi coverage for hotel outdoor areas, business parks, yards, farms, barns, parking lots, garages and other outbuildings, as listed by TP-Link. It is powered by an 802.3at PoE+ switch or injector, such as an Omada PoE+ switch, and fits into an Omada network with Omada gateways and controllers.

Good to know

• Power is by 802.3at PoE+ only; there is no DC input, and no PoE injector or power adapter is listed in the package content.
• This BE9300 rating is for the EU version sold in the Middle East (5 GHz up to 2882 Mbps). The US version is rated BE11000.
• Outdoor 6 GHz use depends on AFC availability in your country, and 320 MHz (6 GHz) / 160 MHz (5 GHz) channels may be unavailable in some regions.
• Omada Mesh, seamless roaming, cloud access and captive portal require an Omada controller (Omada controller v5.15.24 or later per the datasheet).
• Wi-Fi rates are maximum physical link rates; Wi-Fi 7 features need compatible client devices. Actual throughput, coverage and client count vary with the environment.

Technical Specifications

📄 Datasheet: Download the official TP-Link EAP772-Outdoor datasheet (PDF)