Router vs Access Point vs Switch: Home Network Guide for Jordan
What is the difference between a router and an access point? It comes up often in Jordan when the Wi-Fi does not reach every room. In short: the router connects your home to the internet and runs the network, while an access point (AP) only adds Wi-Fi in a new spot, usually through a cable from the router. Add a network switch for more wired ports and the right Ethernet cable, and you can cover every room.
Below: what each device does, when a PoE ceiling access point beats mesh, and how to choose the best switch and internet cable.
Quick picks
| Product | Type | A strong choice for |
|---|---|---|
| TP-Link Archer AX53 | Wi-Fi 6 router | The main router of a family home |
| TP-Link TL-WA1201 | Access point | Adding Wi-Fi to a far room |
| TP-Link EAP610 | Ceiling access point | Clean ceiling installs |
| Tenda i27 | Ceiling access point | Several APs in one building |
| Tenda W15 | In-wall access point | Room-by-room Wi-Fi |
| TP-Link EAP225-Outdoor | Outdoor access point | Gardens, roofs and yards |
| TP-Link Deco M4 (3-pack) | Mesh system | Homes where cables are not possible |
| TP-Link LS1005G | 5-port gigabit switch | More ports by the TV or desk |
| Tenda TEG1105P-4-63W | PoE switch | Powering ceiling access points |
| Hikvision DS-3E1510P-EI/M-8P2F | PoE switch with fiber ports | Fiber links between buildings |
| UGREEN Cat6 NW102 | Cat6 patch cable | PC or TV to the router |
| UGREEN Cat6A NW122 | Slim Cat6A cable | PlayStation and gaming PCs |
| Dahua PFM920-6UN | Outdoor Cat6 reel | Outdoor runs to APs |
Router vs access point vs switch: the difference
The router: the brain of the network
A router connects your home network to the internet. It sits between the internet line (WAN) and your devices (LAN), gives each device an IP address (DHCP), shares one connection between them (NAT) and protects them with a firewall. Most also have LAN ports and Wi-Fi, which is why people mix the devices up. A home needs only one device doing the router job.
The access point: Wi-Fi where you need it
An access point does not connect to the internet by itself and, in AP mode, does not hand out IP addresses. It plugs into the router or a switch with an Ethernet cable and turns that connection into Wi-Fi in a new area. Devices that join it get their addresses from the main router, so everything stays on one network.
The switch: more wired ports
A network switch (often called a "network distributor" in Jordan) adds Ethernet ports. One cable from the router feeds a TV, PC, PlayStation, NVR or several access points. A switch does not create Wi-Fi or give internet on its own; it passes data between the connected devices and the router.
| Device | Main job | Gives IP addresses | Creates Wi-Fi |
|---|---|---|---|
| Router | Connects the home to the internet | Yes | Usually |
| Access point | Adds Wi-Fi in a new area | No (in AP mode) | Yes |
| Switch | Adds wired ports | No | No |
| Mesh system | Whole-home Wi-Fi from several units | Main unit, or none in AP mode | Yes |
When should you use an access point?
Thick walls and several floors
Stone and concrete walls weaken Wi-Fi from a single router. If you can run a cable to the weak area, an access point there is the most reliable fix.
PoE ceiling access points
Ceiling access points spread Wi-Fi evenly from the middle of the space. They use Power over Ethernet (PoE): one cable carries data and power, so no socket is needed on the ceiling. Power comes from a PoE switch or injector. Check the standard: 802.3af gives up to 15.4 W per port and 802.3at (PoE+) up to 30 W. Passive PoE, used by some models, is different, so a standard PoE switch may not power a passive-PoE device. Browse our ceiling access points.
Outdoor Wi-Fi for the garden, roof or farm
Outdoors, choose an access point with a weatherproof (IP-rated) housing and an outdoor-rated cable. See our outdoor access points.
Can I use my old router as an access point?
Yes, if it has an Access Point mode: switch to it in the settings (the menu name differs by brand) and connect a cable from a LAN port of the main router. Without AP mode, turn off its DHCP server, give it an unused address on the same network and use one of its LAN ports, not the WAN port. Avoid two routers in router mode one behind the other: this "double NAT" splits the home into two networks and can break casting to the TV and some online games.
Access point vs mesh vs range extender
Mesh uses two or more units under one Wi-Fi name, and your phone moves between them automatically. It is the easiest choice when you cannot run cables, but a wireless link between units shares airtime with your devices, so far units are usually slower. Many mesh units can also be wired together, which performs like access points. See our mesh Wi-Fi guide and whole-home mesh systems.
Wired access points need a cable to each point, but nothing is lost between units. In new homes and renovations, run Cat6 to the ceiling of each floor before plastering. Range extenders repeat the signal over the air, so speed at the far end drops; they suit one weak room, not a whole floor.
How to choose the best switch (network distributor)
Gigabit ports and the right port count
Pick a switch with 10/100/1000 Mbps (gigabit) ports; older 10/100 switches cap each device at 100 Mbps, slower than many fiber plans. One port takes the cable from the router, so a 5-port switch leaves four for devices and an 8-port leaves seven. Browse our network switches.
PoE switch for access points and cameras
To power ceiling APs or IP cameras, choose a PoE switch and add up the power: your devices together must stay under its PoE budget. For example, the Tenda i27 lists a maximum consumption of 14.04 W, and the Tenda TEG1105P-4-63W has a 58 W total budget. See our PoE switches.
The best switch for fiber internet
Home fiber ends at the provider's fiber router, and its LAN ports are ordinary copper Ethernet. So you do not need a special "fiber switch": any gigabit switch connected to the fiber router with a Cat6 cable works. A switch with fiber ports is needed only when you run fiber cable yourself, for example to a second building.
How to choose the best internet cable
Cat6: the best internet cable for most homes
Cat5e handles gigabit, but Cat6 is the safer choice: gigabit up to 100 m and 10 Gbps over shorter runs (about 55 m). Cat6A carries 10 Gbps over the full 100 m. Higher categories add nothing a home line will use. Full comparison in our Cat6 vs Cat7 vs Cat8 guide and all cables in our Ethernet cables collection.
The best outdoor internet cable
Indoor PVC jackets are not made for sun and rain; outdoors, use a cable with a PE jacket, in conduit where possible.
The best internet cable for PlayStation
PS5 and PS4 consoles have a gigabit Ethernet port, so a good Cat6 or Cat6A cable gives them all the speed your line offers. The real gain over Wi-Fi is a steadier ping and fewer drops.
Pure copper vs CCA, and the 100 m rule
CCA (copper-clad aluminium) cables are fine as short patch cords, but for long in-wall runs and PoE choose pure copper. Keep each Ethernet run under 100 m; for longer distances add a switch in between or use fiber.
Our picks: routers, access points and mesh
TP-Link Archer AX53
A Wi-Fi 6 AX3000 router with 1 gigabit WAN and 4 gigabit LAN ports. Its description lists Router Mode and Access Point Mode. Good for: the main router of a family home, or an extra AP later.
TP-Link TL-WA1201
An AC1200 dual-band access point with four antennas and Beamforming. It supports Access Point, Range Extender, Multi-SSID and Client modes, and passive PoE. Good for: adding Wi-Fi to a far room or a small shop.
TP-Link EAP610
A slim Wi-Fi 6 AX1800 ceiling access point with one gigabit port, powered by 802.3at PoE+ or passive PoE. It supports seamless roaming and Omada Mesh. Good for: ceiling installs in homes, clinics and offices.
Tenda i27
A Wi-Fi 6 AX3000 ceiling access point with 802.3at PoE power and fast roaming (802.11k/v/r). It can be managed by a Tenda M3 or a Tenda router with the AP Controller feature. Good for: several ceiling APs across a villa or business.
Tenda W15
A Wi-Fi 6 AX3000 access point that fits a standard 86-type wall box, powered by 802.3af PoE, with an extra gigabit LAN port for a TV or PC in the same room. Good for: room-by-room Wi-Fi in apartments and villas.
TP-Link EAP225-Outdoor
An AC1200 access point in an IP65 weatherproof enclosure with two detachable antennas. It works with 802.3af and passive PoE and includes a PoE adapter. Good for: gardens, rooftops and farms.
TP-Link Deco M4 (3-pack)
Three mesh units that form one network with a single name; its description lists coverage up to 5,500 sq. ft. Good for: homes where running cables is not an option.
Our picks: switches and cables
TP-Link LS1005G
A 5-port gigabit switch: plug and play, fanless, for desktop or wall mounting. Good for: more ports next to the router, TV or desk.
Tenda TEG1105P-4-63W
Four gigabit PoE+ ports (802.3af/at, up to 30 W per port, 58 W in total) plus one gigabit uplink, with Standard and VLAN modes. Good for: powering ceiling access points or IP cameras.
Hikvision DS-3E1510P-EI/M-8P2F
Eight gigabit PoE ports, two gigabit fiber optical ports and an 80 W PoE budget. Good for: larger sites with a fiber link to another building.
UGREEN Cat6 NW102
A ready-made Cat6 U/UTP cable in lengths from 0.5 m to 50 m, for 1000 Mbps networks. Its conductor is CCA, so use it as a patch cord rather than for PoE runs. Good for: a PC, TV or receiver to the router or switch.
UGREEN Cat6A NW122
A slim (2.8 mm) pure-copper Cat6A cable that supports 10 Gbps, in lengths from 0.5 m to 10 m. Good for: a PlayStation or gaming PC.
Dahua PFM920-6UN
A 305 m box of outdoor Cat6 cable with 24AWG oxygen-free copper and a black PE sheath, designed for Ethernet and PoE. Good for: outdoor runs to access points and cameras.
Wiring tips
- Build a star: router, then switch, then access points and wired devices, each on its own cable.
- If your access points are not managed together, give them the same Wi-Fi name and password and set them on different channels.
Frequently asked questions
What is the difference between a router and an access point?
The router connects the home to the internet, assigns IP addresses and runs the network. An access point only adds Wi-Fi in another area and gets its connection from the router.
Can I use a router as an access point?
Yes. Use its Access Point mode; without one, turn off its DHCP server and connect the cable to a LAN port.
Is mesh better than access points?
Mesh is easier without cables; wired access points are faster and more stable.
What is the best network switch for home, and does it slow the internet?
A 5- or 8-port gigabit switch suits most homes, and it does not reduce your internet speed.
What is the best Ethernet cable for PS5?
A Cat6 or Cat6A cable, preferably pure copper.
What is the best outdoor Ethernet cable?
An outdoor Cat6 cable with a PE jacket and pure copper.
Which switch do I need for fiber internet?
Any gigabit switch connected to a LAN port of your fiber router. Fiber ports are needed only if you run fiber cable yourself.
Prices and full specs are on each product page. Browse our network switches, Ethernet cables, ceiling access points and Wi-Fi routers, and read our guide to the best router in Jordan. If you cannot run cables, our guide to boosting Wi-Fi at home compares extenders and mesh systems.



